3/4″ Brass Non-Return Valve / Check Valve
If you have a DAB Pump and its above your water tank (ie it’s drawing water from below) you will need this to prime your pump otherwise the water will just p1ss down from the top of the prime hole and into your tank…! You may also want to add this between your pump and your first dripper to stop any backflow if you’re not using a solenoid, or to not have to wait to charge your line with each irrigation event.
You’ll also need a solenoid valve with the DAB Pump, but save yourself the headache and get the whip kit as we’ve done the leg work on all the pieces you need. And if you’re using a solenoid valve, you’re going to need a controller like the Growlink.
You will need some form of PVC cement solvent/weld like Tang IT (for plain fittings) and PTFE tape or Loctite55 is recommended when you need to screw any components together.
Related items you’re (very!) likely to need
- PVC Fittings
- Threaded socket/ coupling
- Threaded nipple
- PTFE Tape
- Loctite55 pipe sealing cord
- Flora Flex male adapter
